Do you work from high heights often or are you involved in scaffolding? Its time you get safety harness kits to give you confidence and flexibility as you do your job. More to the above mentioned, harness kits perform other functions like rock climbing, crane operation and sailing to ensure safety while you are undertaking your activities. For a safety harnesses to work efficiently it should be used properly. Here are ways in which it should be used;
- Shake Harness to allow the straps to fall into the rightful position.
- If either of the straps is malformed you should release the straps and shape them into the appropriate position.
- Slide the straps above the shoulders and ensure that the D ring is situated at the back on the middle part of your shoulders.
- Place the leg straps into their rightful place between the legs and connect them to the contrary end.
- Connect the chest strap at the mid part of the chest and tighten them until the shoulder straps are properly tight.
- After fastening all the straps tightly ensure that you have created some space for complete movement. Ensure that all excess straps are passed through the ring keepers.
Safety harnesses come in different categories that are used for different occasions;
- Body Belts
These belts come in two designs; single or double. They are used to prevent the chances of falling when someone is working from high heights. They cannot be used for a premeditated fall because they are specifically used for positioning.
- Chest Harnesses
This equipment is meant to save someone that is fallen in a cistern or a tank.
- Full body Harness
It is can only be used to prevent fatal falls.
- Suspension Belts
This kit is used to suspend the worker while on the job site.
For your safety harness kit to last long and work effectively it needs regular inspection from a professional to detect whether it is malfunctioning. The following could be signs that your safety harness needs some attention;
- Tongue Clasp
When in a proper condition the buckle tongues should be overlay the clasp frame while allowing a forth and back movement in the socket. If your tongue buckle stops functioning that way you will need to check whether it is experiencing some deformation problems or sharp ends.
- Belts and D Rings
You should always watch out to ensure that your belts and D ring doesn’t have broken fibres, tattered edges, loosened stitches or chemical effects. When under pressure the rivets may fail; they need to be always in a straight position.
If you want your safety kit to last long and function properly you need to keep it clean at all times. When your equipment is contaminated by dirt or corrosive chemicals on your job site; you are supposed to clean it properly before you store it in a proper place.
When you go out to purchase a safety harness kit you need to ensure that you get the one that will work perfectly to suit your needs. Ensure that you buy the kit from a reliable store because the consequences of a faulty kit may cost you severe injuries or at worse death.